The Serial device is different from all the other devices in Hardware Station in that it does not have any default functionality in LS Central to use its functionality.
In order to use a Serial device in any functionality (other than as a Dallas Key), for example to log a user onto the POS using a RFID device or to use it as a fiscal device, a codeunit needs to be customized by an LS Retail Partner. The codeunit must also be selected in the POS Serial Device Card in LS Central, and often a customized implementation in the Hardware Station is also required.
|
Click here for instructions on how to add this device to the Management Portal. |
|
To use this device in LS Central, the device needs to be added to the Hardware Profile. You can add the device automatically through the Detect Hardware functionality on the Hardware Profile. |
|
|
You can configure the functionality of the Serial device in the POS Serial device card in LS Central. When the device is added automatically through the Hardware Profile, all configurations are set with default values. Note: The codeunit that should control the behavior of the device within LS Central functionality needs to be configured in the device's card in LS Central. |
|
|
The default functionality of this device can be customized using a customized DLL. Click here for more information. |
|
There are one or more How to ... articles available for this device. Click here to see a list of all Hardware Station How to ... articles. |