Dallas Key

A Dallas Key is a device where all POS users have their own Dallas key and can use the key to log on and off the POS. The LS Central POS always handles a Dallas Key as a log on or off operation, and a Dallas Key cannot be used as a manager override.

A Dallas key device can either be a serial device or an OPOS device. If it is an OPOS device, it is handled as an authentication device within LS Central and Hardware Station, and should be created under that device type (not as a Dallas Key).

	Click here for instructions on how to add this device to the Management Portal.
	To use this device in LS Central, the device needs to be added to the Hardware Profile. You can add the device automatically through the Detect Hardware functionality on the Hardware Profile.
	You can configure the functionality of the Dallas Key in the POS Dallas Key card in LS Central. When the device is added automatically through the Hardware Profile, all configurations are set with default values. Note:The Dallas Key device needs to be configured with a Logon and Logoff prefixes. If the device that is being used has different prefixes from the default values created by LS Central, you must change those values in the POS Dallas Key card.
	To connect this device to a staff member in LS Central, you must create an MSR Staff Link.
	The default functionality of this device can be customized using a customized DLL. Click here for more information.
	This device is part of the Virtual station, which can be useful when testing and doing demonstrations. Click here for more information.
	There are one or more How to ... articles available for this device. Click here to see a list of all Hardware Station How to ... articles.